The beaming of external Compton emission

We consider a relativistically moving blob consisting of an isotropic electron distribution that Compton-scatters photons from an external isotropic radiation field. We compute the resulting beaming pattern, i.e. the distribution of the scattered photons, in the blob frame as well as in the observer’s frame by using the full Klein–Nishina cross section and the exact incident photon distribution. In the Thomson regime the comparison of our approach with Dermer (1995) results in concurrent characteristics but different absolute number of the scattered photons by a factor of f_corr = 3.09. Additionally, our calculation yields a slightly lower boost factor which varies the more from the corresponding value in Dermer (1995) the higher the spectral index p of the electron distribution gets.     

Refinements in the data analysis of VIRTIS-M-IR Venus nightside spectra

The successful long-duration radiation measurements performed by the VIRTIS instrument aboard ESA’s Venus Express spacecraft have provided an excellent collection of atmospheric and surface data that stand out due to their high temporal and spatial coverage of the planet and due to a high diversity of measurement and environmental conditions.     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

自动转移飞行器的轨控总体方案

介绍了欧空局的自动转移飞行器（ATV）的轨道控制方案和技术。给出了ATV的飞行方案、测量敏感器和执行机构的配置，以及在空间站调相段、寻的段、接近段和最终逼近段的轨控策略。     

π-TFSK时频调制信号状态迁移的分析

本文主要对π－ＴＦＳＫ时频调制信号的状态迁移进行分析。首先，从数学模型出发，对π－ＴＦＳＫ时频调制信号的状态进行分析；然后，推出了该信号的状态迁移图；最后求出了π－ＴＦＳＫ时频调制信号的状态迁移矩阵。     

助推-滑行式燃料最优真空飞行轨迹的设计方法

建立了飞行器助推-滑行式燃料最优真空飞行轨迹的最优控制模型,给出了一种更为简单、直观的内点约束条件和横截条件的推导方法,讨论了高效且更为稳定的数值计算方法,提出了两种应用模式,通过与连续推力式和脉冲式飞行方案的比较,说明这种设计方法在节省燃料方面具有优势.     

水气动量交换的实验研究

在风浪槽中进行水气动量交换实验，测量了不同风速和风区下的波浪及空气湍流流场。测量数据表明水面上风速分布符合对数律，水气界面附近在小范围的动量交换常通量层。阻力系数ＣＤ随风速增加线性增长，随波龄增加而减小。这一趋向与理论分析及外海帝测结果一致。对风浪发展过程中波浪和空气湍流谱结构的分析证明了水气运动的耦合关系。     

低成本多小天体并行交会技术

小天体资源开发方兴未艾,为降低开发风险和成本,需要发射无人探测器交会观测多个待选目标小天体。传统多目标探测方案存在无法多次交会、成本高,周期长等不足。提出的低成本多小天体并行交会技术,能够对多小天体探测任务进行解耦,实现基于微纳飞行器的低成本多目标并行交会勘查,从而降低探测成本,缩短探测周期。该技术结合行星借力与不变流形机制构建了低能量星际转移方案。然后引入扰动流形思想,使微纳飞行器能够实现与目标小天体的快速交会。进一步,提出了一种多目标小天体探测全局搜索方法,该方法基于在日地halo轨道上停泊的微纳飞行器集群,逐次确定小天体探测目标,并利用上述方法完成了多微纳飞行器与多小天体的交会。数值仿真结果表明,该方案能够大幅度降低转移过程的燃料消耗,并缩短转移时间。     

R141b在矩形微尺度通道中的两相流传热特性

设计搭建水力直径分别为1mm和0.5mm的矩形微尺度通道实验台,研究了以R141b型制冷剂作为工质的两相流沸腾传热特性。实验取热流密度为1～16kW/m2、质量流速为111.1～333.3kg/(m2·s)和质量干度为0～1,分析了三者对平均传热系数的影响,探究影响换热的主导因素。结果表明:热流密度较高时,平均传热系数随热流密度增加而减小,流动换热主要受到沸腾传热的影响;当质量流速较大且热流密度较低时,平均传热系数随热流密度增加而有所增长;热流密度较低时,平均传热系数随质量流速变化明显,热流密度升高到一定值后,质量流速对平均传热系数的影响很小;当质量流速处于111.1～333.3kg/(m2·s)时,平均传热系数随质量干度的增加而减小。